English Planes


Arcade Files


   
 

Working with Hands - James E. Price


 
  My Study of Plane Fences Continuing 1 of 4  


Thanks to a bitterly cold day, I got in some good shop time and continued my study of plane fences that can be made for less than $5.00.

 

Some beginners may want an edge trimming plane but do not want to spend $75-$150 for a Stanley 95 or a Lie Nielson equivalent.

This one I made out of Sepele wood. I also dug around in my vintage hardware stash and found two brass finials to adorn the mahogany jointer fence I made yesterday. Both fences work perfectly in planing edges of boards for joining. Consider making one; you'll like using it.

I also deal with adding a temporary fence to a common block plane to make an edge trimming plane.

I made it out of scrap wood and odds and ends in my stash of old fasteners. I spent a little over two hours making the fence. If you want a cheap edge-trimming plane, this is the way to get one.

The jointer fence in the background is the one I made yesterday. I made the one in the foreground today. The top fence is mounted on a common Stanley No. 5 and the bottom one is on a Bedrock 605.

This is the one I made out of mahogany yesterday with brass
finials added to the elevator bolts to give it a little flash.

The two fences are interchangeable between a Bedrock 605
and a common Stanley No. 5.


 
468x60
1 of 4  

Router Planes



Infill Planes



   

Copyright 2016 wkFineTools.com and Wiktor Kuc.  All Rights Reserved.  Designated trademarks and brands are the property of their respective owners.
No part of the content from this website can be reproduced by any means without specific permission of the publisher.

Valid CSS!